Memory configuration – Dell POWEREDGE C6105 User Manual
Page 48
Advertising
48
|
Using the System Setup Program
Option
Description
CPU Power Capping
(P-state 0 default)
This option can decide the highest performance P-state
in OS.
This setting only can be seen when ―Power
Management‖ be selected to ―OS Control‖ mode.
PSU Power Capping
(150 default)
The setting controls PSU Power, its range limited in
150˜2000W. The value is sent to BMC by IPMI
command and BMC controls PSU power.
This setting only can be seen when ―Power
Management‖ be selected to ―APML‖ mode and the
system board at location 4 in the chassis.
Memory Configuration
Scroll to this item and press Enter to view the following screen:
Advertising