Cable routing for fan control board, Ee figure 3-41 – Dell POWEREDGE C6105 User Manual
Page 154
Advertising
154
|
Installing System Components
2 Replace the screw to secure the fan controller board to the chassis. See
3 Connect all the cables to the fan controller board. See Figure 3-41.
You must route these cables properly through the tabs on the chassis to
prevent them from being pinched or crimped.
4 Replace the power distribution boards. See "Installing a Power
Distribution Board" on page 149.
5 Close the system. See "Closing the System" on page 143.
6 Reconnect the system to its electrical outlet and turn on the system,
including any attached peripherals.
Cable Routing for Fan Control Board
Figure 3-41. Cable Routing−Fan Control Board
Advertising