Dell POWEREDGE C6105 - Manual (Page 69)

Using the System Setup Program | 69
Token Setup option Description
0225 Embedded Video
Controller Disable embedded video controller.
024D Wait For ‗F1‘ If
Error Enabled the BIOS from prompting for F1/F2 on
error. BIOS pauses at F1/F2 prompt.
024E Wait For ‗F1‘ If
Error Disabled the BIOS from prompting for F1/F2 on
error. BIOS pauses at F1/F2 prompt.
024F Quiet Boot Enables the display of the splash or summary screen,
rather than the detail of the POST flow.
0250 Quiet Boot Disabled the display of the splash or summary screen.
The user is able to see the detail of the POST
messages.
0251 Network Drives/1st
Drive The first NIC is used for PXE boot, followed by
NIC2.
0252 Network Drives/1st
Drive The second NIC is used for PXE boot, followed by
NIC1.
02B6 Memory voltage
operation Set memory voltage to 1.5v.
02B7 Memory voltage
operation Set memory voltage to 1.35v.
02B8 Memory voltage
operation Auto detect memory voltage.
4019 Terminal Type The BIOS console redirection, if enabled, operates in
VTUTF8 emulation model. See also tokens BFh,
C0h, and D7h.
401A Terminal Type The BIOS console redirection, if enabled, operates in
VT100 emulation model. See also tokens BFh, C0h,
and D7h.
401B Terminal Type The BIOS console redirection, if enabled, operates in
ANSI emulation model. See also tokens BFh, C0h,
and D7h.
401C Redirection After
BIOS POST The BIOS console redirection, if enabled, continues
to operate after the OS boot hand-off.