Dell POWEREDGE C6105 - Manual (Page 109)

Installing System Components | 109
Figure 3-14. Removing and Installing the LSI 9260-8i RAID Battery
1 RAID battery latch 2 LSI 9260-8i RAID battery
3 LSI 9260-8i RAID battery carrier 4 system-board assembly
5 RAID battery connector
Installing the LSI 9260-8i RAID Battery
1 Insert the LSI 9260-8i RAID battery into the battery carrier until the
RAID battery latch locks into place. See Figure 3-14.
2 Reconnect the cable connecting to the LSI 9260-8i RAID battery.
Make sure the cable is routed properly as shown in Figure 3-13.
3 Replace the system-board assembly. See ―Installing a System-Board
Assembly‖ on page 93.