Dell POWEREDGE C6105 - Manual (Page 107)

Installing System Components | 107
2 Figure 3-14. Removing and Installing the LSI 9260-8i RAID Battery
3 for the RAID battery connector.
4 Connect the mini-SAS&SGPIO cable to the LSI 9260-8i card, and
connect the other end of the cable to the corresponding connectors on
the interposer extender. See Figure 3-13 for the cable routing. See
Figure 5-9 for the interposer extender connectors.
NOTE: When connecting the RAID battery cable, the BBU interposer card
should be installed on the LSI 9260-8i card. The BBU interposer card in the
figure below is just for you reference.
Figure 3-13. Cable Routing for LSI 9260-8i Card
Item Cable From
(LSI 9260-8i Card)
To
(RAID Battery and HDD
to Backplane SATAII
Connectors)
RAID battery
cable RAID battery connector
(J4) RAID battery
connector
SAS/SGPIO
cable Mini-SAS connector A &
Mini-SAS connector B SATAII connectors
0~5 and SGPIO A&B