Dell POWEREDGE C6105 - Manual (Page 68)

68 | Using the System Setup Program
Token Setup option Description
00A2 Restore on AC
Power Loss After an AC power loss, when AC power is restored,
the system returns to the state was in when power
was lost.
00A3 Restore on AC
Power Loss After an AC power loss, when AC power is restored,
the system powers on.
00BA NIC2 - 82576 Disable the system‘s secondary embedded network
interface controller.
00BB NIC2 - 82576 Enable the system‘s secondary embedded network
interface controller, but don‘t enable the NIC‘s
associated PXE or RPL boot-ROM.
00BC NIC2 - 82576 Enable the system‘s secondary embedded network
interface controller (full-function), including its PXE
boot-ROM.
00BF Remote Access Serial Console Redirection Off.
00C0 Serial port number Serial Console Redirection On, output to COM1. See
also token D7h.
00D7 Serial port number Console redirection ON - on COM2.
00D8 Load Optimal
Defaults Enable load CMOS optimal.
00D9 None Disable load CMOS optimal.
00FE Legacy USB
Support Disables support for legacy USB.
00FF Legacy USB
Support Enables support for legacy USB.
0137 OnChip SATA Type Onboard SATA controller(s) is set to Native IDE
mode.
0138 OnChip SATA Type Onboard SATA controller(s) is set to IDE-
>AMD_AHCI mode.
0139 OnChip SATA Type Onboard SATA controller(s) is set to AMD_AHCI
mode.
0224 Embedded Video
Controller Enable embedded video controller.