Wine Guardian Ducted Split Wine Cellar Cooling Systems (WGS175) - Manual - Manual (Page 30)

31
WARNING
警告

Check weights to be sure that the rigging equipment can support and move the Wine
Guardian unit safely. Note any specific rigging and installation instructions located in
the Installation section of this manual.

All supports for the unit must be capable of safely supporting the equipment’s weight
and any additional live or dead loads encountered.

All supports for the unit must be designed to meet applicable local codes and
ordinances.

Do not remove access panels until fan impellers have completely stopped.
Pressure developed by moving impellers can cause excessive force against the
access panels.

Fan impellers continue to turn (free-wheel) after the power is shut off.
•检查重量，以确保索具设备能够安全的支持和移动机组。请注意每个索具和安
装说明都在酒卫主机手册的安装部分
•所有的支撑必须能安全支撑机组的重量和遇到的任何其他活的或固定负载
•所有对机组的支持的设计必须符合适用地方的法规和条例。
•不要在风扇叶轮完全停止前移动检查口。 移动叶轮所产生的压力会对检修门产
生过强的压力。
•风扇叶轮会在电源关闭后继续旋转。
CAUTION
警示

Clean only with a dry cloth.

Never pressurize equipment above specified test pressure. See Wine Guardian
Specification sheet on page 13.

Do not use the Wine Guardian near water.

Do not block any supply or return air register or duct. Install in accordance
with the instructions in this manual. Do not defeat the safety purpose of the
polarized or grounding type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.