Wine Guardian Ducted Split Wine Cellar Cooling Systems (WGS175) - Manual - Manual (Page 35)

36
Planning the Installation 规划安装
Addressing Items in the Planning Process 解决规划过程中的问题
 Where to locate the fan coil unit? Should it be built into the wine cellar or
mounted remote and ducted into the cellar?

 How to mount the fan coil unit? 
 Decide where to locate the supply and return grilles in the room to achieve
the temperature gradient and circulation preferred.

 Locate the electrical power outlet close to the unit. Do not use an extension
cord!

 Locate the condensing unit in a clean, dry and well-ventilated area. 
 Where to locate the remote interface controller and/or remote sensors? 
 Where to run the drain line? 
 Are all the parts available to complete the installation? 
 在哪里安装主机？是将系统安装到墙上或主机安装窖外，由通风管道引入酒窖？
 如何安装机组？
 决定在何处安装供给和返回格栅，以达到温度梯度和理想的循环
 将电源插座靠近机组， 窖内，窖外？不要使用延长线！
 冷凝器热排气管道必须排出室外？
 在哪里安装恒温器？
 往哪里运行排水管线？
 是否所有的部件在这里完成安装？
IMPORTANT
Installation of residential and commercial split systems must be performed by qualified
service technicians with proper training in the installation, start up, service, and repair of
these systems. Certification to handle refrigerants is also required.
重要提示
安装住宅和商业分体式系统必须由合格的服务技术人员经过适当的培训来完成安装，
启动，维护和修理这些系统。制冷剂的处理还需要认证。