KEYENCE FS-N10 Series - Manual (Page 21)

2-2 Connecting the Fiber Unit
2
Inst
al
la
ti
on and
Conn
ect
ion
2-7 - Digital Fiber Sensor FS-N10 Series User's Manual -
5
Insert the fiber unit into the fiber connection ports on the amplifier.
Insert the fiber unit until it reaches the position of the transmit / receive
indicators (approximately 14 mm).
6
Move the fiber lock lever back in the direction of arrow (3) to secure the
fiber.
· If a thin fiber unit is used, an adapter provided with the thin fiber unit
will be required.
Make sure to use the adapter that matches the thin fiber unit.
· To connect a coaxial reflective fiber unit to the amplifier, connect the
single-core fiber to the transmitter (T) side, and connect the
multiple-core fiber to the receiver side (R).
Fiber transmit / receive indicators Fiber connection ports
Fiber
Point
Cable outer dia
1.3
1.0
Adapter
AdapterA
(OP-26500)
AdapterB
(OP-26501)
Appearance
Receiver
Position of fiber transmit / receive indicators
Transmitter
Single-core fiber
Multi-core fiber
T
R