KEYENCE FS-N10 Series - Manual (Page 43)

3
Ba
sic
Oper
ati
on
3-21 - Digital Fiber Sensor FS-N10 Series User's Manual -
3-7
Initialization
The sensor amplifier can be reset to the factory default settings.
1
Press and hold the [SET] and [PRE-
SET] buttons simultaneously for 3
seconds or more.
The " rSt " display flashes.
2
Press the [MODE] button.
3
Press the button to display
" init ".
4
Press the [MODE] button.
After the settings are initialized, the
screen displays "
oK ", which is then
replaced with the current received light
intensity.
Refer to "Factory Default Setting (Default Value) List" on page 6-6.
Initialization of Settings (Reset to Initial Values)
Reference