Deutsch, Notes, 1 press in the shooting pause mode – Panasonic NVS90E User Manual

Page 66: Aufnehmen eines standbildes für 5 sekunden, Schnappschuß-funktion), Hinweise, 1 in der betriebsart aufnahmepause drücken

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SNAPSHOT

REC

o

ENGLISH

DEUTSCH

How to Shoot a Still Picture for

5 Seconds (Snapshot)

■ Using the Snapshot Function

Recording a still picture for approx. 5 seconds can be

performed by pressing a single button.

Notes:

1. Since the still picture is recorded from the image

memory, the picture quality may be slightly inferior to

that of normally recorded pictures.

2. To prevent picture distortion, do not move or shake

the Movie Camera during still picture shooting.

1

Press in the Shooting Pause Mode.

•The image in the Viewfinder stands still and the

“SNAP” Indication appears in the Viewfinder.

•The still picture will be recorded for approx.

5 seconds.

Notes:
1. When using this function repeatedly, wait at least 2 to

3 seconds before pressing the [SNAPSHOT REC]

Button again.

2. While the Digital Wipe Function or the Digital Mix

Function is activated, this function cannot be

operated.

3. If the Viewfinder has been turned off by the Auto

Power Save Function, the Snapshot Function cannot
be activated.

Aufnehmen eines Standbildes für

5 Sekunden

(Schnappschuß-Funktion)

■ Benutzung der Schnappschuß-Funktion

Durch Drücken einer einzigen Taste kann ein Standbild

ca. 5 Sekunden lang aufgenommen werden.

Hinweise:

1. Da das Standbild aus dem digitalen Bildspeicher

aufgezeichnet wird, sind Bildqualität und -auflösung

im Vergleich zu den auf normale Weise

aufgezeichneten bewegten Bildern etwas geringer.

2. Um Bildstörungen zu vermeiden, den

Camerarecorder während der Schnappschuß-

Aufnahme nicht bewegen oder Erschütterungen
aussetzen,

1

In der Betriebsart Aufnahmepause

drücken.

• Das Bild im Sucher steht still, und die Anzeige

„SNAP“ erscheint im Sucher.

•Das Standbild wird für eine Dauer von ca.

5 Sekunden aufgezeichnet.

Hinweise:
1. Bei wiederholt durchgeführter Schnappschuß-

Aufnahme sollte jeweils 2 bis 3 Sekunden gewartet

werden, bevor die Taste [SNAPSHOT REC] erneut

gedrückt wird.

2. Wenn die Funktion „Digital Wipe“ oder „Digital Mix“

aktiviert ist, kann diese Funktion nicht benutzt werden.

3. Nachdem der Sucher durch die Stromspar-Funktion

ausgeschaltet worden ist, kann die Schnappschuß-

Funktion nicht ausgelöst werden.

-66-

Advertising