AERCO RECON 1000 User Manual
Page 89
RECON Water Heaters Installation, Operation & Maintenance Manual
CHAPTER 6 – MAINTENANCE
OMM-0103_0A
AERCO International, Inc.
100 Oritani Dr. Blauvelt, NY 10913
Page 89 of 178
GF-147
Phone: 800-526-0288 PRI:
10/28/2014
Figure 6-8: Anode Assembly and Combustion Chamber Head
6.8 HEAT EXCHANGER CLEANING
AERCO recommends that the heat exchanger of the unit be cleaned annually to maintain
maximum heat transfer efficiencies using a solution of HydroSkrub and water. HydroSkrub is
distributed by AERCO International, Inc. and is designed to dissolve the toughest water scale,
lime, mud and rust deposits from virtually any type of water-based equipment.
--WARNING! -
Please review MSDS, specifications, and our website
(www.aerco.com
)
for additional information, or call technical service
at (800) 526-0288.
Do not drain the unit without venting the shell! A vacuum in the unit
may displace the head liner causing serious damage not covered
by warranty.
ANODE
MOUNTING
BRACKET
ANODE
BLOCK
ANODE
BLOCK
1/4-20 HEX HEAD SEAL BOLTS
(4)