AltiGen MAXCS 7.5 MaxAgent - Manual (Page 66)

60 MaxAgent Manual
You can configure these general settings:
• Default Trunk Access — The trunk access codes are defined
by the system administrator. When you get an incoming call
over multiple trunks and cannot issue a return call, the system
will automatically select the default trunk access code to place
your call.
• Enable Smart Tag — If you check this option, two things
happen:
• In Internet Explorer, a dotted underline will appear under
telephone numbers. You can click the number to make the
call. The number will look like this:
• In Microsoft Office programs (Office 2003 and 2007), a
Smart Tag action icon will appear by a phone number. From
the Smart Tag’s drop-down menu, you can select Dial By
MaxClient.
Whether the call is made automatically or the number is
simply placed in the dialer box depends on how you set Auto-
Dial (see below).