EVCO EVF328J9 - Manual (Page 50)

EVCO S.p.A. EVF 300 series | Installer manual ver. 1.1 | Code 144F300E114
Page 50 of 62
Erd
device settings upload not completed successfully alarm
solutions:
- to restore the factory settings
main consequences:
- all outputs will be switched off
ESt
device settings download not completed successfully alarm
solutions:
- press and release the key
main consequences:
- no consequence
When the cause of the alarm disappears, the device restores normal operation, except for the following alarms:
- the use temperature alarm (code “Ht”), which requires a key to be pressed and released
- the power supply cut-off alarm (code “PF”), which requires a key to be pressed and released
- the device settings download not completed successfully alarm power supply cut-off alarm (code “ESt”), which requires a
key to be pressed and released
- the firmware alarm of the original settings not coinciding with that of the destination settings(code “CEr”), which requires
the device power supply to be cut-off
‐ the device settings upload not completed successfully alarm power supply cut-off alarm (code “Erd”), which requires
factory settings to be restored.