FingerTec Q2i Manual User Manual
Page 10
Center point
VOICE MESSAGE
VOICE / MESSAGE
WHAT DOES IT MEAN?
“Verified”
Identity verification is successful, the terminal stores the transaction
logs and opens the door (if connected to door access)
“Try again please”
Identity verification is failed because the finger is not properly posi-
tioned, the template is not available in the terminal or the password
is incorrect.
“Admin Affirm”
You are not an administrator of the system and you cannot access
Menu page
“Duplicate Finger”
This message only appears during registration when the finger that
you want to enroll has been enrolled before. “FP Enrolled Alrd” will be
displayed on the LCD screen.
“Invalid ID”
For 1:1 verification, User ID entered does not match with fingerprint.
FINGERPRINT VERIFICATION
1:N –
1:N verification does not require any input of your user ID. Place your finger properly on
the scanner and the terminal will take a second to verify your identity.
1:1 –
1:1 requires input of User ID before the terminal reads and verifies your identity. Press
1:1/1:N > Input ID on the screen > Press fingerprint icon > terminal will read and verify.
Some precautions have to be taken to get a good read every time.
·
Make sure the center point of your finger is
placed in the middle of the scanner for a good read.
·
Recommended to use index finger. The terminal
accepts other fingers but index is the most convenient.
·
Make sure the finger is not wet, too dry, injured or dirty
·
Do not press hard on the sensor, just place it
comfortably
·
Avoid direct sunlight or bright light
PASSWORD VERIFICATION
Password can be an option for those who do not prefer to use other verification methods. To
verify using password, press 1:1/1:N > insert User ID and press key button > insert password
and press OK.
CARD VERIFICATION
Place the card on the card scanning area and the terminal will read and verify the card.