FingerTec Q2i Manual - Manual (Page 6)

6
Enroll users, manage user data
and input workcode.
Setup FingerTec terminal com-
munication with computer
through LAN, RS232 and RS485.
Set security password of the de-
vice for a secure data transfer.
Configure the settings of the Fin-
gerTec terminals from general
to display setting to fingerprint.
Data management, update via
USB flash disk, keyboard func-
tions, reset and other terminal
settings can be done here.
Adjust the date and time set-
tings of the terminal.
Upload and download data and
information to and from the
FingerTec terminal using a USB
flash disk.
Run tests on the FingerTec ter-
minal to diagnose the terminal
on various aspects.
Check user attendance and
transaction logs that are avail-
able in FingerTec terminals and
perform housekeeping of the
machine.
View free and used memory of
the terminal as well as the ter-
minal’s details in system infor-
mation.
CONTENTS
Main Menu
Power On/Off Button
Use the power on/off button to turn the terminal on or off. You can disable the but-
ton to avoid accidental shut off of the terminal.
Battery
Terminals operate using power supply from a standard power outlet. Inside the ter-
minal, there is an RTC battery for the running of the clock. Charge the terminal for at
least 3 hours straight before you start using it. When there is a serious delay in time
or the clock keeps on restarting, the RTC needs to be replaced.
External power supply:
Mini UPS (uninterrupted power supply) 5V and mini UPS 12V provide mobile power
supply to the terminals. Charge the mini UPS sufficiently for optimum performance.
Refer to
accessory.fingertec.com for more information about accessories.
Date/Time
The terminals display the date and time at the home screen. Choose the date and
time format based on your preference. Press Menu > Date/Time > Select Value > OK
to save.