FingerTec Q2i Manual - Manual (Page 21)

21 CONTENTS
Misc Settings
SLEEP TIME
Sleep time is a period before the terminal goes to sleep mode. This setting is available
as a power saving feature of the terminal. The time range is from 0-999 seconds. Menu
> System > Misc Set > Sleep Time > Determine your time > Ok to Save
EXT BELL
FingerTec colour time attendance terminal models allow you to link an external bell
such as siren to the system. Press Menu > System > Misc Set > Ext Bell > On/Off > Ok
to Save
DISPLAY THE FINGERPRINT IMAGE ONSCREEN
The terminal offers to display a fingerprint image when doing scanning for users to un-
derstand how to place the finger properly. You can opt to show the fingerprint image.
Press Menu > System > Misc Set > Fp Image > Choose Your Preference > Save
Options available include:
Fingerprint Image Function
Display
Both show The fingerprint image is displayed on the screen during both enrollment
and verification.
Neither show The fingerprint image is neither displayed on the screen during enrollment
nor during verification.
Enrol show The fingerprint image is displayed on the screen only during enrollment.
Match show The fingerprint image is displayed on the screen only during verification.
POWER KEY
You can disable or enable the power on/off button to avoid accidental shutdown of
FingerTec terminals. Disable/Enable: Press Menu > System > Misc Set> LockPwrKey
> On/Off > Ok to save.
SYSTEM LANGUAGE
FingerTec terminals offer various languages to match your local requirements. Maxi-
mum of 3 language packs are available in the terminal and it’s set according to your
request during purchase. The default language is English. Press Menu > System > Misc
Set > Language > Choose your language > Save