FingerTec Q2i Manual - Manual (Page 20)

20 CONTENTS
Data Update Using USB Flash Disk
To update the terminal using a USB flash disk, press Menu > System > Update > Make
sure that you have the USB Flash Disk plugged into the terminal before you proceed.
Keyboard
Define the function keys in your terminal here. Press Menu > System> Keyboard > Se-
lect the function > Determine the Key Number > Name The function (To activate the
alphanumeric keyboard, press the right arrow button) > You can also set to auto switch
this function on a certain time of days > Ok to Save
Display Settings
NUMBER OF TRIES
1:1 Match Retry Times: You can set the limit to the number of tries for the 1:1 verification
mode. The range is from 1-9. If a user’s number of tries exceeds the limit, the terminal
could trigger the alarm system to alert security that somebody is meddling with the
terminal. Press Menu > System > Display> 1:1 Match Retry Times > Determine the Value
> ok to Save
Password Retry Times: You can set the limit to the number of tries for password verifica-
tion. The range is from 1-9. If a user’s number of try exceeds the limit, the terminal could
trigger the alarm system to alert security that somebody is meddling with the terminal.
Menu > System > Display> 1:1 Match Retry Times > Determine the Value > Ok to Save
Clock Mode: There are two clock modes available in FingerTec terminals. Choose the
one your prefer. Press Menu > System > Display> Clock Mode > Choose 1 or 2 > Ok to
Save
PICTURE DELAY
Picture delay refers to the idle period before the screen displays your loaded advertise-
ment. It ranges from 0-999 seconds. Press Menu > System > Display > Picture Delay >
Determine your time > Ok to Save
CLOCK DELAY
Clock delay is an idle period before the screen displays your chosen clock picture. It
ranges from 0-999 seconds. Menu > System > Display > Clock Delay > Determine your
time > Ok to Save
Reset
Reset allows you to perform 3 tasks:
1. Reset All Default Settings
2. Reset Keyboard Settings
3. Reset Other Parameters
Please make sure that you are certain of performing any of the tasks before proceeding
to avoid loss of crucial data.