FingerTec Q2i Manual - Manual (Page 11)

11 CONTENTS
Adding User Information
User information can be added into the terminal through two ways. One is through the
FingerTec terminal and the other through the Software. To add/change user information
via the terminal, press Menu > User Mgmt icon > Manage User > OK > Select Instruction
> Edit/Add > OK to Save.
Instruction Function
Search User Insert User ID in the column and press OK
Record Press to view available user records
Edit User Delete/Add Verification Methods and change Privilege
Del User Delete User, Fingerprint or Password
New User Enrolment of New User
Field Function
ID No. Edit user ID based on your company’s employee numbering system. Maximum length of
user ID is 9 digit
Name Add name of the user in this field (Can only be done via TCMS). Maximum number of char-
acters is 24
FP Quantity of Fingerprint
PWD Quantity of Password
CARD Quantity of Card
It is recommended that the updating of user information be done through the Software
software. After the information is updated, sync the Software and the terminal to display
the information.
Deleting User
Only an administrator can perform user deletion at the FingerTec terminal. To delete
certain user(s), press Menu > User Mgmt > Manage User > OK > Select Del User > Choose
“Delete User” > OK
Please be extra careful when performing this task to avoid any unauthorized deletion.