Chapter 3: connection - syncing face id, Installations and communications, Ingress online activation – FingerTec Face ID 2 (FEM 800) Manual User Manual

Page 11: Installation and setup of ingress, Connecting terminals to ingress, Using usb to download/upload data, Connection - syncing face id

Advertising
background image

12

CONTENTS

3

CONNECTION - SYNCING FACE ID

Installations and Communications

At the rear of Face ID, there are 6 connections available for
power and communications.

Back of Terminal

1

USB Port

Linking with USB flash disk for remote data transfer.

2

TCP/IP Port

Connecting with CAT 5 cable for LAN connection, one end
to this port and another to the computer’s TCP/IP Port.

TCP/IP for Single Connection – Linking Face ID to
a single computer using TCP/IP requires Ethernet
10/100Base-T Crossover Cable.

The cable can be used to cascade hubs or to connect

Ethernet stations back-to-back without a hub. It works
with both 10Base-T and 100Base-TX.

Joint 1 Pin

Joint 2 Pin

TX+

1

• •

3 RX+

TX-

2

• •

6 RX-

RX+

3

• •

1 TX+

RX-

6

• •

2 TX-

1

8

TOP

FRONT
1

8

1

2

3

4

5

6

Advertising