FingerTec Face ID 3 Manual - Manual (Page 21)

21
Face Settings
setting threshoLd
Threshold is a level of infrared scanner’s sensitivity. Threshold determines how
many percent of your face is being read by the system. The higher the threshold
level, the more percentage is being read, the more restricted the system. Configure
the threshold for 1:1 and 1:N methods.
For 1:1, the range is from 0-99 and the recommended value is 0.
For 1:N, the range is from 0-99 and the recommended value is 80.
Menu > System > Face > 1:1 Threshold/1:N Threshold > Input your value > Save
CaMera exposUre
You can adjust the light exposure level of infrared cameras in the Face ID . Im-
proper value to the settings could affect the performance of the camera. The recom-
mended value is 20. Menu > System > Face > Exposure > Input your value > Save
adjUsting iMage QUaLity
To determine the quality of face images captured by the Face ID  cameras during
enrollment and verification, you can adjust the quality - the recommended value is
80. Press Menu > System > Face > Quality > Input your value > Save
Log Settings
Every time the Face ID  is being used, transaction logs are kept in the memory.
These settings are for the Face ID  to regulate housekeeping of logs.
Log aLert
When log storage is at a certain level, users/administrator need to be alerted to
avoid underperformance of the terminal. The recommended value is 99. Menu >
System icon > Log Settings> Log Alert > Input your value > Save
Update
FingerTec offers updates of the Face ID  regularly. Always consult your local reseller
before you update the firmware of the terminal or alternatively you can contact us
at [email protected]
System Information
This option allows installers to check the information of the terminal including stor-
age, firmware, algorithm, etc. To retrieve the Face ID ’s System Information. Press
Menu > Sys Info > Record/Device