FingerTec Face ID 3 Manual - Manual (Page 8)

8
Keyboard
Use the onscreen QWERTY keyboard to type in alphabet and number input into
the Face ID .
Type Upper Case
Tap the arrow pointing up on the left
corner of the keyboard to change the
lowercase to upper case.
Type Number
Tap the 12 key to change the key-
board to display numbers.
Return
Tap Enter to return. Tap X on the key-
board top right corner when you are
done using the onscreen keyboard.
Date/Time
The Face ID  displays date and time at the home screen. Choose a date and time
format based on your preference. Press Menu > Date/Time > Select value > Save.
You can select the time format to be either the 12-hour format or the 24-hour for-
mat.
Voice Control
Voice Control lets you control the level of volume emitted by the Face ID .
Turn On/Off – The Face ID  lets you to turn on/off the voice based on your prefer-
ence.Press Menu > System > General > Voice Prompts > On/Off >Save.
adjUst voLUMe
The default volume of the Face ID  voice is Mid (medium). To sustain the perform-
ance of the speaker in the Face ID , the volume is recommended to remain at Mid
value. To adjust the volume Press Menu > System > General > Volume > Select Low
| Mid |High