FingerTec Face ID 3 Manual - Manual (Page 7)


New User User Connection
System Data Date/Time
Auto Test USB Sys Info
Main Menu
New User
Add new user to the Face ID .
User
Enroll, edit, delete, and insert user information from
User icon. The Face ID  allows storage of 200 facial
images.
Connection
Setup the Face ID  communication with computer
through LAN, RS22 and RS485. Set communication
with a computer for a secure data transfer.
System
Configure the settings of the Face ID  including at-
tendance and update settings.
Data
Check user attendance and transaction logs that are
available in the Face ID  and perform housekeeping
of the terminal.
Date/Time
Shortcut to set date/time into the Face ID .
Auto Test
Run tests on the Face ID  to diagnose the terminal on various aspects.
USB
Transfer data to and from the Face ID  using a USB flash disk.
Sys Info
Show basic information of the Face ID  and its storage status.
Touch Keypad
Press 1:1 to view the touch keypad. You can input in-
formation into the Face ID  through the touch keypad.
It contains numbers from 0-9, face verification mode (1
to 1 or 1 to many), password verification mode, Cancel,
and Backspace buttons.