1 • troubleshooting – FingerTec Face ID 3 Manual User Manual

Page 33

Advertising
background image



1 •

TROUBLESHOOTING

“UnaBLe to ConneCt” appears

When this message appears, it means that the settings for the Face ID  and the

computer are not properly done. Find out which method you are using to connect.

The Face ID  offers LAN, RS22, RS485 and USB communication methods. Refer to

Chapter  to further understand the topic.

“adMin aFFirM” appears

You are not the administrator of this Face ID  terminal. Only an authorized admin-

istrator of the system is allowed to access the Menu. Any attempt from a normal

user to access the Menu will prompt “Admin Affirm” message on the screen. In case

the administrator has resigned from the company, kindly contact your FingerTec

authorized reseller to access the terminal.

the terMinaL doesn’t read yoUr FaCe

Have you stood properly without making any facial expressions? Your position from

the camera must be at a proper distance from the camera. If you see your reflection

at the camera, you are in the right position. Now, were you making facial expres-

sion during verification? Stay calm and look at the camera, and please do not cover

your face with anything. Have you tested the camera of the Face ID ? The camera

might not be working properly. Test your camera’s performance. Refer to Chapter

9 to Test the Face Camera.

the Led is BLinKing aLL the tiMe

You have nothing to worry about unless the blinking light is red. The green blinking

light is indicating that the terminal is under the standby mode. Red blinking light

may signal a problem in the Face ID . Contact your reseller for consultation.

rFid Card doesn’t respond

Two possibilities for this problem:

Have you registered the card to the terminal? The card must be registered to the

Face ID  before the terminal could read the information in the card. Refer to chap-

ter 4 User for card enrollment.
Have you assigned the user ID to the verification group that supports RFID card?

Without setting the terminal that you are under a group that supports RFID card,

the Face ID  wouldn’t read your card.

Advertising