Interlogix GE-DS-242-PoE - Manual (Page 135)

Chapter 5: Console Management
GE-DS-242-PoE Managed Ethernet Switch User Manual 131
Configure IP address
The GE-DS-242-PoE Managed Switch is shipped with default IP address as
follows.
IP Address : 192.168.0.100
Subnet Mask : 255.255.255.0
To check the current IP address or modify a new IP address for the Switch,
please use the procedures as follows:
Show the current IP address
1. On "Switch# " prompt, enter "configure".
2. On "Switch(config)# " prompt, enter "show ip".
3. The screen displays the current IP address, Subnet Mask and Gateway. As
show in Figure 5-2.
Figure 5-2: Show IP information screen
Configure IP address
1. On "Switch(config)# " prompt, enter the following commands and press
<Enter>. As show in Figure 5-3.
Switch(config)# ip address 192.168.1.100 255.255.255.0
Switch(config)# ip default-gateway 192.168.1.254