Interlogix GE-DS-242-PoE - Manual (Page 92)

Chapter 4: Web-Based Management
88 GE-DS-242-PoE Managed Ethernet Switch User Manual
This page includes the following fields:
OBJECT DESCRIPTION
Group Key This is a read-only column field that displays the trunk group ID.
Port member
This is a read-only column field that displays the members of this
static trunk group.
LACP enabled
Having set up the aggregator setting with LACP enabled, you will see the
trunking group information between two switches on the tab of Aggregator
Information.
 Switch 1 configuration
1. Set System Priority of the trunk group. The default is 1.
2. Select a trunk group ID by pull down the drop-down menu bar.
3. Enable LACP.
4. Include the member ports by clicking the Add button after selecting the
port number and the column field of Work Ports changes automatically.
Figure 4-43: Aggregation Information of Switch 1
5. Click on the tab of Aggregator Information to check the trunked group
information as the illustration shown above after the two switches
configured.