Configure poe -- port – Interlogix GE-DS-242-PoE User Manual
Page 200
Chapter 6: Command Line Interface
196
GE-DS-242-PoE Managed Ethernet Switch User Manual
Configure PoE -- Port
poe enable
Description:
Enabling or disabling the port POE injects function.
Command Level:
Global Configuration
Syntax:
poe enable [<port-list>]
[no] poe enable [<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example:
Switch(config)# poe enable 1
Switch(config)# show poe status 1
Port
Admin
Oper
Priority
Power Limit[W]
Current
Consumption [W]
Current[mA]
Device
Class
Port1
Enable
on
High
15.4
13.4
279
0
Switch(config)# no poe enable 1
Switch(config)# show poe status 1
Port
Admin
Oper
Priority
Power Limit[W]
Current
Consumption [W]
Current[mA]
Device
Class
Port1
Disable
off
High
15.4
--
--
0