Power over ethernet commands 192, Power over ethernet commands, Display system poe status – Interlogix GE-DS-242-PoE User Manual
Page 196
![background image](/manuals/679186/196/background.png)
Chapter 6: Command Line Interface
192
GE-DS-242-PoE Managed Ethernet Switch User Manual
Power over Ethernet Commands
show poe
Show System Power over Ethernet information
show poe status
Show PoE port information
poe temperature-protection
Enabling or disabling the PoE power supply over
temperature protection
poe limit-mode
Configure System PoE power limit mode information
poe enable
Enabling or disabling the port POE injects function
poe priority
Set port priority for the power supply management
poe maximum-power
Enabling or disabling per port power output limit
Display System PoE status
show poe
Description:
Show System Power over Ethernet information
Command Level
Global Configuration
Example:
Switch(config)# show poe
Maximum Available Power
System Operation Status
PoE Power Consumption
Usage Threshold
PoE Power limit mode
:190Watts
: on
: 55 watts
: 21%
: Port Priority