Direct access – Interlogix GE-DS-242-PoE User Manual
Page 30
Advertising
Chapter 3: Switch Management
26
GE-DS-242-PoE Managed Ethernet Switch User Manual
Figure 3-4: Console management setup
Direct Access
Direct access to the administration console is achieved by directly connecting a
terminal or a PC equipped with a terminal-emulation program (such as
HyperTerminal) to the Managed Switch console (serial) port.
When using this management method, a straight DB9 RS-232 cable is required
to connect the switch to the PC. After making this connection, configure the
terminal-emulation program to use the following parameters:
57600
bps
8 data bits
No
parity
1 stop bit
Figure 3-5: Terminal parameter settings
Advertising