Interlogix GE-DS-242-PoE - Manual (Page 142)

Chapter 6: Command Line Interface
138 GE-DS-242-PoE Managed Ethernet Switch User Manual
port flow
Description:
Enable or disable port flow control.
Syntax:
port flow <enable | disable> <enable | disable> [<port-list>]
Parameters:
The first <enable | disable> enables or disables flow control in full duplex mode.
The second <enable | disable> enables or disables flow control in half duplex
mode.
<port-list> specifies the ports to be set. If not entered, all ports are set.
port rate
Description:
Set port effective ingress or egress rate.
Syntax:
port rate <ingress | egress> <0..8000> [<port-list>]
Parameters:
<0..8000> specifies the ingress or egress rate.<0..8000>
<port-list> specifies the ports to be set. If not entered, all ports are set.
port priority
Description:
Set port priority.
Syntax:
port priority
<disable | low | high> [<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.