Interlogix GE-DS-242-PoE - Manual (Page 137)

Chapter 5: Console Management
GE-DS-242-PoE Managed Ethernet Switch User Manual 133
Commands Level
The following table lists the CLI commands and descriptions.
Modes Access Method Prompt Exit Method About This Model
User EXEC
Begin a session
with your switch.
switch>
Enter logout or
quit.
The user commands
available at the user
level are a subset of
those available at the
privileged level.
Use this mode to:
• Perform basic tests.
• Display system
information.
Privileged
EXEC
Enter the enable
command while
in User EXEC
mode.
switch#
Enter disable to
exit.
The privileged
command is the
advanced mode.
Use this mode to
• Display advanced
function status
• Save configuration
Global
Configuration
Enter the
configure
command while
in privileged
EXEC mode.
switch
(config)#
To exit to
privileged EXEC
mode, enter exit
or end
Use this mode to
configure those
parameters that are
going to be applied to
your switch.