Switch static configuration, Port configuration and show status – Interlogix GE-DS-242-PoE User Manual
Page 141
![background image](/manuals/679186/141/background.png)
Chapter 6: Command Line Interface
GE-DS-242-PoE Managed Ethernet Switch User Manual
137
Switch Static Configuration
Port Configuration and show status
port state
Description:
Turn the port state on or off.
Syntax:
port state
<on | off> [<port-list>]
Parameters:
<port-list>
specifies the ports to be turn on or off. If not entered, all ports are turn
on or off.
port nego
Description:
Set port negotiation.
Syntax:
port nego
<force | auto | nway-force> [<port-list>]
Parameters:
<port-list>
specifies the ports to be set.If not entered, all ports are set.
port speed
Description:
Set port speed (in mbps) and duplex.
Syntax:
port speed
<10 | 100 | 1000> <full | half> [<port-list>]
Parameters:
<port-list>
specifies the ports to be set. If not entered, all ports are set.