Interlogix GE-DS-242-PoE - Manual (Page 148)

Chapter 6: Command Line Interface
144 GE-DS-242-PoE Managed Ethernet Switch User Manual
Lacp
Description:
Specifies the added trunk group to be LACP enabled.
Syntax:
lacp
no-lacp specifies the added trunk group to be LACP disabled.
Parameters:
<port-list>
specifies the ports to be set.
<active-port-list> specifies the ports to be set to LACP active.
no trunk
Description:
Delete an existing trunk group.
Syntax:
no trunk <trunk-id>
Parameters:
<trunk-id> specifies the trunk group to be deleted
LACP Commands
[no] lacp
Description:
Enable/disable LACP.
lacp system-priority
Description:
Set LACP system priority.
Syntax:
lacp system-priority <1..65535>
Parameters:
<1..65535>
specifies the LACP system priority.