Interlogix GE-DS-242-PoE - Manual (Page 202)

Chapter 6: Command Line Interface
198 GE-DS-242-PoE Managed Ethernet Switch User Manual
poe maximum-power
Description:
Enabling or disabling per port power output limit.
The command is configurable while "poe limit-mode" is set to "Total-Limit"
Command Level:
Global Configuration
Syntax:
poe maximum-power <1~15.4> [<port-list>]
no poe mximum-power [<port-list>]
Parameters:
<1~15.4>
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example:
Switch(config)# poe maximum-power 10 1
Switch (config)# show poe status 1
Port Admin Oper Priority Power Limit[W]
Current
Consumption [W]
Current[mA]
Device
Class
Port1 Enable on Low 10 00 0