Interlogix GE-DS-242-PoE - Manual (Page 65)

Chapter 4: Console Management
GE-DS-242-PoE Managed Ethernet Switch User Manual 61
Figure 4-25: Port-based VLAN interface
Create a VLAN and add member ports to it
1. Click the hyperlink "VLAN" \ "Static VLAN" to enter the VLAN configuration
interface.
2. Select "Port Based VLAN" at the VLAN Operation Mode, to enable the
port-based VLAN function.
3. Click " Add " to create a new VLAN group. See Figure 4-26 appears.
4. Type a name and Group ID for the new VLAN, the available range is 2-
4094.
5. From the Available ports box, select ports to add to the Managed Switch
and click Add .
6. Click Apply.
7. You will see the VLAN Group displays.
8. If the port-based VLAN groups list over one page, please click "Next
Page"
to view other VLAN groups on other page.
9. Use the "Delete" button to delete unwanted port-based VLAN groups
10. Use the " Edit" button to modify existing port-based VLAN groups.
By adding ports to the VLAN you have created one port-based VLAN group
completely.