Interlogix GE-DS-242-PoE - Manual (Page 176)

Chapter 6: Command Line Interface
172 GE-DS-242-PoE Managed Ethernet Switch User Manual
spanning-tree port priority
Description:
Set spanning tree port priority.
Syntax:
spanning-tree port priority <0-240> [<port-list>]
Parameters:
<0-240> specifies the port priority. The value must be in steps of 16.
<port-list> specifies the ports to be set. Null means all ports.
show spanning-tree
Description:
Show spanning-tree information.
show spanning-tree port
Description:
Show spanning tree per port information.
Syntax:
show spanning-tree port [<port-list>]
Parameters:
<port-list> specifies the port to be shown. Null means all ports.
The remaining commands in this section are only for system with RSTP (rapid
spanning tree, 802.1w) capability:
spanning-tree debug
Description:
Enable or disable spanning tree debugging information.