Interlogix GE-DS-242-PoE - Manual (Page 21)

Chapter 2: Installation
GE-DS-242-PoE Managed Ethernet Switch User Manual 17
Step 1:
Place the Managed Switch on a hard flat surface, with the front panel
positioned towards the front.
CAUTION:
Use only the screws supplied with the mounting brackets. Damage
caused by using incorrect screws will invalidate the warranty.
Step 2: Attach the rack-mount bracket to each side of the Managed Switch. Use
the supplied screws attached to the package.
Figure 2-5 shows how to attach brackets to one side of the Managed Switch.
Figure 2-5: Attaching rack-mount brackets to the GE-DS-242-PoE
Step 3:
Secure the brackets tightly, but do not overtighten screws.
Step 4:
Follow the same steps to attach the second bracket to the opposite side.
Step 5: After the brackets are attached to the Managed Switch, use suitable
screws to securely attach the brackets to the rack, as shown in Figure 2-6.
Figure 2-6: Mounting the GE-DS-242-PoE in a rack