Non-ipv4 acl commands – Interlogix GE-DS-242-PoE User Manual
Page 192
![background image](/manuals/679186/192/background.png)
Chapter 6: Command Line Interface
188
GE-DS-242-PoE Managed Ethernet Switch User Manual
acl (add|edit) <1-220> (qosvoip) <0-4094>
Description:
Add or edit ACL group for Ipv4.
Syntax:
acl (add|edit) <1-220> (qosvoip) <0-4094> <0-7> <0-1F> <0-1F> <0-FF> <0-
FF> <0-FFFF> <0-FFFF> <0-FFFF> <0-FFFF>
Parameters:
(add|edit)
specifies the operation.
<1-220>
specifies the group id.
(qosvoip)
specifies the action, do qos voip packet adjustment.
<0-4094>
specifies the VLAN id. 0 means don't care.
<0-1F>
specifies the port ID value.
<0-1F>
specifies the port ID mask.
<0-FF>
specifies the protocol value.
<0-FF>
specifies the protocol mask.
<0-FFFF>
specifies the source port value.
<0-FFFF>
specifies the source port mask.
<0-FFFF>
specifies the destination port value.
<0-FFFF>
specifies the destination mask.
e.g. acl add 1 qosvoip 1 7 1 1 0 0 0 0 0 0
Non-Ipv4 ACL commands
no acl <1-220>
and show acl [<1-220>] commands are same as Ipv4 ACL
commands.