Interlogix GE-DS-242-PoE - Manual (Page 97)

Chapter 4: Console Management
GE-DS-242-PoE Managed Ethernet Switch User Manual 93
Forwarding and Filtering
The frames of Ethernet Packets contain a MAC address (SMAC address), which
shows the MAC address of the equipment sending the frame. The SMAC
address is used by the switch to automatically update the MAC table with these
dynamic MAC addresses. Dynamic entries are removed from the MAC table if no
frames with the corresponding SMAC address have been seen after a
configurable age time.
Dynamic MAC Table
Entries in the MAC Table are shown on this page. The Dynamic MAC Table
contains up to 8192 entries, and is sorted first by VLAN ID, then by MAC
address. You can view all of the dynamic MAC addresses learned by the listed
port.
Figure 4-48: Dynamic MAC Address interface
MAC Table Entries
OBJECT DESCRIPTION
NO The index of the MAC address entry.
MAC The MAC address of the entry.
PORT The ports that are members of the entry.
VID The VLAN ID of the entry.
Type Indicates whether the entry is a static or dynamic entry.