Juniper Systems Allegro CX Manual - Manual (Page 134)

134 Allegro CX Owner’s Manual
Adjusting the Viewing Area on the Display
A standard PTab screen is shown above with the menu bar, toolbar,
formula bar, and taskbar showing. You can view seven lines of the
spreadsheet on the screen.
When the menu bar, toolbar, formula bar, and taskbar are hidden, as
shown below, you can view eight lines of the spreadsheet. Refer to
the Application Command Bars section found earlier in this chapter for
details on how to adjust the viewing area.
It is possible to view nine lines when using a monochrome display,
or eight lines using a color display, if you move the tool bar up to
a line to share with the File, Edit, etc line. Refer to the Application
Command Bars section found earlier in this chapter for details
Entering Data/Editing Cells
A cell can contain: a number, text, date/time, Boolean value or
formula. Tap on the formula bar (or double-tap the cell if the formula
bar is off) to edit the cell’s value/formula. If the number or date
begins with a single quote (‘), it is treated as text.
- Number (examples: 123.45, -1.2e55)
- Text
- Date/Time: The format is taken from the FPC regional settings.
Go to Start | Settings | Regional Settings, and then choose the
Number tab and the List separators combo box. You must specify a
year in the date. (Examples: 8/22/03 in the U.S.A. vs. 22.8.03 in
Germany, 10:44, 12/30/2003 14:25:30.)
▲