Network id, Pc connection – Juniper Systems Allegro CX Manual User Manual
Page 81
Advertising
Allegro CX Owner’s Manual 81
Network ID
The Network ID tab is used to create a personal, unique identifi er you
receive for accessing a remote network. In the Network ID tab, enter
the same user name, password, and domain name you use to log
onto the remote network at the offi ce. This ID allows you to access
the remote network with your Allegro.
PC Connection
The PC Connection Properties applet allows you to change the port
and baud rate used for communicating with your Allegro and PC
through ActiveSync on the PC Connection tab. The USB port is the
default setting.
Advertising