Juniper Systems Allegro CX Manual - Manual (Page 79)

Allegro CX Owner’s Manual 79
If you disable the IrDA Ports option, a pop-up message appears
informing you to perform a System Reset on your Allegro to save
and activate this option.
Note: A System Reset is required to save and activate the selected
setting whether you enable or disable the IrDA ports.
Keyboard
The Keyboard Properties has a Repeat tab used to enable or disable
character repeat when you hold down a key on your Allegro
keyboard. If the Enable character repeat is selected, you can set the
repeat delay and repeat rate.
Network and Dial-up Connections
The Network and Dial-up Connections applet allows you to create a
connection for your Allegro to access the Internet. You can choose
from a dial-up connection or a direct connection.
‡