Juniper Systems Allegro CX Manual - Manual (Page 203)

Allegro CX Owner’s Manual 203
COM Ports
The COM Ports tab displays the available Bluetooth COM ports.
On the COM Ports tab you can enable, disable, and check the
assignments of the Bluetooth COM ports of your Allegro.
Note: Make sure that you set COM port assignments for the various
connection types that are available on the Allegro. If you disable the infrared
ports, you have more ports available to use for Bluetooth devices. The
infrared uses COM ports 4 and 5. These two ports become available for
Bluetooth devices if the infrared ports are disabled. COM port 7 is used for
USB communications, and it is not accessible as a Bluetooth port.
Object Sharing
The Object Sharing tab allows you to assign a Bluetooth Shared Folder.
This is the folder used when you allow others to access your fi les
using Bluetooth.
‡