Juniper Systems Allegro CX Manual - Manual (Page 268)

268 Allegro CX Owner’s Manual
Data Format Setup
The Data Format tab allows the user to specify the format of the data
that is returned by the scanner.
Format
The Format drop-down box allows you to select if a prefi x and/or
suffi x character are added to the bar code data. The prefi x character
is added before the bar code data. The Suffi x 1 character is appended
to the end bar code data and the Suffi x 2 character is appended after
the Suffi x 1 character. If Suffi x 1 is not selected, Suffi x 2 is appended to
the end of the bar code.
Tap on the down arrow on the right side of the Format box to access a
drop-down menu of the available data format. Tap on the format you
want to use. The eight Format options are:
Data
Data, Suffi x1
Data, Suffi x2
Data, Suffi x1, Suffi x2
Prefi x, Data
Prefi x, Data, Suffi x1
Prefi x, Data, Suffi x2
Prefi x, Data, Suffi x1, Suffi x2
‰
‰
‰
‰
‰
‰
‰
‰