Juniper Systems Allegro CX Manual - Manual (Page 50)

50 Allegro CX Owner’s Manual
USB/Power Dock Connector Pins
The interaction between the Power Dock and Allegro happens
through the connection of the six connectors on the bottom of the
Allegro. There are six pins in the Power Dock that touch the Allegro
connectors as the Allegro is placed into the Power Dock. The six pins
can be replaced if damaged or bent.
USB Connection
To establish an ActiveSync connection between the Allegro and
desktop PC while using a USB port, follow the directions in the
Establishing a First Time ActiveSync Connection section in Chapter 5 of
this manual.
Once you have set up and successfully connected to ActiveSync for
the fi rst time, you only need to place the Allegro into the USB/Power
Dock to have it automatically begin the ActiveSync connection
sequence.
▲