Juniper Systems Allegro CX Manual - Manual (Page 270)

270 Allegro CX Owner’s Manual
# Adds a # sign before or after the scanned bar code
(depending on suffi x or prefi x).
Tab Performs a Tab key function, which moves the cursor
over to the next column.
Code Type Setup
The Code Type tab lists the bar code types that the scanner can read.
You can enable (box checked) and disable (box not checked) each of
these bar code types. The Setup button at the bottom right corner of
the screen is used to set up more detailed parameters for the bar code
types in the Setup section below.
Setup
Tapping on the Setup button opens the Additional Parameter Setup
screen, accessing the following seven bar code setup options:
UPC/EAN 1
UPC/EAN 2
Code39
MSIPlessey
Interleaved
RSS/Code93/Discrete
Codabar
‰
‰
‰
‰
‰
‰
‰