Juniper Systems Allegro CX Manual - Manual (Page 87)

Allegro CX Owner’s Manual 87
Remove Programs
The Remove Programs applet allows you to remove programs that
you have installed on the Allegro. You cannot remove programs that
were factory installed, such as WordPad.
SpeedSwitch
The SpeedSwitch applet allows you set the performance of the Allegro
CX. There are two settings on this applet, one increases the speed of
the Allegro, the other increases the battery life.
Note: To enable the performance option once it is changed, the Allegro
must be turned off and then back on.
Increase Performance
The Increase Performance setting is the default setting when the
Allegro is shipped. This setting increases the speed performance
of the unit. This setting causes the Allegro to consume more power
resulting in a shorter battery life.
