Juniper Systems Allegro CX Manual - Manual (Page 215)

Allegro CX Owner’s Manual 215
Printer
The Printer tab enables you to select the printer that is automatically
used when print software sends output to the Bluetooth printer port.
Tap on the down arrow next to the My favorite printer: box to access
a drop-down box of all available printers. Tap on the printer you are
using as your favorite.
Select one of the following two options that work best for your
printer needs:
Use the favorite selected above. This option automatically uses
the My favorite printer: that you selected.
Don’t use a favorite – prompt me with a list of suitable devices
instead. This option searches all accessible printers around you
and gives you a list that you must select from before a printer
output connection is made.
Note: If no printer is available the printer option defaults to Don’t use a
favorite – prompt me with a list of suitable devices instead.
Tapping on OK saves any changes made. Tapping on the X closes the
Properties screen and returns you to the Bluetooth Devices screen.
‰
‰
‡