Juniper Systems Allegro CX Manual - Manual (Page 64)

64 Allegro CX Owner’s Manual
The Windows CE .NET Desktop appears on the screen:
Suspend/Resume Mode
If you press the On/Off key, the Allegro goes into suspend mode.
When you turn it back on, it resumes in the same place it was at
before you turned it off. For example, if a PTab spreadsheet fi le was
on the screen when you turned the Allegro off, the same spreadsheet
screen appears when you turn the Allegro back on. (If the batteries
are drained or left out of the Allegro for more than fi ve minutes, the
Allegro restarts instead of resuming. Refer to the Chapter 2, Batteries
section for details.)
Display Touchscreen
The display has a touchscreen used to activate programs in Windows
CE and to make selections. The touchscreen works similarly to a
mouse.
▲