Juniper Systems Allegro CX Manual - Manual (Page 78)

78 Allegro CX Owner’s Manual
IrDA
The IrDA Settings applet is used when using infrared or Bluetooth on
your Allegro CX. The IrDA tab allows you to enable or disable object
exchange (OBEX) and/or the IrDA ports.
OBEX
The OBEX tab offers a setting that allows you to connect or
disconnect OBEX and IrDA. The OBEX function is disconnected by
default. This default setting permits access to the raw IR, and helps
extend the battery life of your Allegro.
Note: If the OBEX Server options box is grayed out, the COMM Ports
option to Disable IrDA Port found on the Ports tab has been activated.
Ports
The Ports tab allows you to enable or disable the IrDA ports on your
Allegro. Disabling the ports allows you access to one more additional
Bluetooth port when using Bluetooth on your Allegro.
‡